10mm Bronze Polycarbonate Roofing Sheet Cut to Size 
UV Protection
1,50 kg / SQM

Polycarbonate Multiwall Sheet is a Remarkable Insulation Glazing Material manufactured using latest technologies with quality basic materials with Added Co-extruded Protection from the Effective of UV Wearing.

Polycarbonate is a unique engineering thermoplastic which combines a high level of mechanical, optical and thermal properties. The versatility of this material makes it suitable for many engineering applications.

Polycarbonate Sheet is stronger and lighter than most glazing material, installation is easier and less structure support is required. When extruded in multi-wall sheet form, it’s optical and impact properties in particular render this material an ideal candidate for a wide range of roofing and cladding applications.

Usage structures; Roofing of Shopping Mall, ECO Building, Stadium, Airport, Industrial Building, Railway Station, Subway Station Entrance, Erection Partition, Facade, Green House, Awning, Walkways, Carports.

Production Standards & Technical Features

Transparency Standards & Features

Assembly information;

-When installation, the direction of panels’ ribs should be ensured downward in order to reduce the accumulation of internal dust and derive the condensed water easily. And make sure the minimum installing slope is 5%; the direction of ribs should be consistent with the slope of metal frame.

-Curved installation of sheets can be cold bent without thermal processing. The radius should be larger than their minimum permitted range-more than 175 times the sheet thickness. The sheet should be bent along the ribs running direction, the incorrect bending direction induces undue stresses and strains, causing premature failure and will void the warranty.

- The printing surface of protective film is co-extruded UV-resistant layer, please install it sunside. Due to electrostatic adsorption of dust and scratches surface, please do not peel off protective films before project completion. Films should be removed in a week after the project completion.

-The coefficient of thermal expansion (3/1000mm) should be considered when designing the sheet’s installing, if drilling is needed,the hole centre and the edge of the sheet spaced at least 30mm. The drilling diameter should be 1.5 times longer than the screw diameter. The designing installing panels that are longer than 6000mm are supposed to extend the telescopic margin. When necessary, please use neutral structural adhesive to seal. Contacting any acidic, alkaline substances may cause advancing aging and damage; and prohibit to use the PVC adhesive strip and gasket because their decomposition may damage sheet.

-Gently wash the surface of sheet with a solution of mild soap and clean water, then dry the surface with a soft cloth.

Free collection is available. For a view, you are always welcome in our showroom.